Clinical, Dental, Medical & Surgical Supplies

BD 305194 - NEEDLE 23X1 1/2 100/BX 10BX/CS

305194 – 23 G BD Needle 1 1/2 in. Thin wall IM, Single use, Sterile

BD HYPODERMIC NEEDLE is sharp, tri-beveled stainless steel needles are with non-coring design. Unique grinding and polishing process enhances the sharpness for ease of penetration. The needles feature universal fit, triple sharpened, sterile and are color coded hubs for easy identification.

  • PrecisionGlide stainless-steel needles with translucent, color-coded, polypropylene hubs.
  • Can also be sterilized with ethylene oxide (EtO) in their individual, easy-to-peel blister package.
  • Thin wall IM, regular bevel.

Key Product Features

Hub Color Turquoise
Hub Material Polypropylene
Hub Type Luer
Needle Gauge 23 G
Needle Gauge (m) 0.60 mm
Needle Length (in.) 1 1/2 in.
Needle Length (m) 38.10 mm
Needle Tip Type Regular
Needle Type Hypodermic
Needle Wall Type Thin wall IM
Sterile Sterilized product
Total Shelf Life 1825
Type Of Bevel Regular
Sterilization Method Radiation
BPA Free Not made with BPA
DEHP Free Not made with DEHP
PVC Free Not made with PVC
Latex Statement Not made with natural rubber latex
Disposable Disposable product
Single Use Product is for single use only

Types of Needle Walls and Bevels

The Thin Wall needle is thinner than a Regular Wall needle. The inner diameter is bigger without any increase in the outside diameter. For example, a 21 G Thin Wall needle has the same outside diameter as a 21 G Regular Wall, but has the same inner diameter as a 20 G needle. Thin Wall allows the same flow volume as a Regular Wall needle one gauge larger.

305194 Thin Wall

Thin Wall: As shown in the diagram, the thin wall needle has a narrower steel wall, allowing a greater volume of fluid to pass through it. The flow rate is typically equivalent to that of a needle one gauge larger. This is especially important with very thin needles.

305194 Regular bevel

Regular bevel: The most common bevel, used for a vast majority of applications. Typically used for intramuscular and subcutaneous injections

Stainless Steel Needle

Made of stainless steel, which is siliconized to allow easier penetration, thus minimizing patient discomfort. Available in different lengths and gauges to suit individual clinical and patient needs.

BD Conventional Needle & Syringe Color Chart

Device Characteristics

What MRI safety information does the labeling contain? Labeling does not contain MRI Safety Information
Device required to be labeled as containing natural rubber latex or dry natural rubber (21 CFR 801.437) No
Device labeled as “Not made with natural rubber latex” No
For Single-Use Yes
Prescription Use (Rx) Yes
Over the Counter (OTC) No
Kit No
Combination Product No
Human Cell, Tissue or Cellular or Tissue-Based Product (HCT/P) No

Product Packaging Information

Packaging Level Shelfpack Each Case
Quantity 100 1 1000
Length 116.0 mm 451.0 mm
Width 88.0 mm 206.0 mm
Height 98.0 mm 129.0 mm
Weight 188.0 g 1.88 g 1.88 kg