Your #1 Source For Hard-To-Find Medical Supplies

Surface Prep™ – LVT / Linoleum Deep Scrub Cleaner

Description

Surface Prep™ is a water-based cleaning concentrate designed for aggressively removing embedded soils and scuffs in upper layers of alternative floor surfaces such as LVT, Linoleum and Rubber. With a mild pH formulation, minimal rinsing is required to save time and labor. Surface Prep™ is ideal for preparing a surface for the application of approved coatings to protect and highlight floors.

Key Market Information

  • Code: 2621
  • Packaging: 4 x 1 Gal. Case

Directions

SCRUB/RE-COAT USING STANDARD 175 RPM FLOOR MACHINE:

Dilute SURFACE PREP™ in a mop bucket at a dilution ratio of 1:6 to 1:10, depending upon build-up. Liberally mop solution onto floor surface and allow to dwell for 1 to 4 minutes (depending on how aggressive it is desired to scrub). With machine and appropriate floor pad or brush, scrub surface of floor until all embedded soils and scuffs are removed. After scrubbing, remove solution from floor with wet-dry vacuum or a clean mop. Damp mop rinse with clear water to remove any excess residue. Allow floor to completely dry prior to applying new coating.

SCRUB/RE-COAT USING AUTOMATIC SCRUBBER:

Dilute SURFACE PREP™ in mop bucket at a dilution ratio of 1:6 to 1:10, depending upon build-up. Liberally mop solution onto floor surface and allow to dwell for 1 to 4 minutes (depending on how aggressive it is desired to scrub). Fill auto scrubber with clear water, mount appropriate floor pad or medium grade brush. With vacuum off and squeegee up, scrub the floor until all embedded soils and scuffs are removed. Lower squeegee and vacuum all scrubbing solution. Using clear water from the auto scrubber, rinse floor to remove any excess residue. Allow floor to completely dry prior to applying new coating.

Features & Benefits

  • Mild range pH formulation aggressively removes embedded soils and scuffs
  • Reduced rinsing saves time and labor
  • Use with standard floor machine or with automatic scrubber
  • Prepares surfaces for future coating

Specifications

  • Color – Pink
  • Odor – Orange
  • pH (Concentrate) – 9.9
  • Upper Cloud – >140°F
  • Lower Cloud – < 25°F
  • Flash Point – Not available
  • Biodegradable – Yes
  • Specific Gravity (g/cc) – 1.01 ± 0.01
  • Density (lbs/gal) – 8.4 ± 0.1
  • Free Rinsing – Yes
  • Non Corrosive – Yes
  • Shelf Life – 1 year minimum in original unopened container

Safety

WARNING: MAY CAUSE AN ALLERGIC SKIN REACTION. CAUSES SERIOUS EYE IRRITATION. KEEP OUT OF THE REACH OF CHILDREN

  • Precautionary statement: Prevention: Avoid breathing mist or vapor. Wash thoroughly after handling. Contaminated work clothing must not be allowed out of the workplace. Wear protective gloves. Wear eye/face protection.
  • Response: If on skin: Wash with plenty of water. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Specific treatment (see this label). If skin irritation or rash occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Wash contaminated clothing before reuse.
  • Storage: Store away from incompatible materials.
  • Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations. This product is a “Hazardous Chemical” as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. All components are on the U.S. EPA TSCA Inventory List.
  • Additional safety measures: Read the entire label and SDS before using this product, and for additional first aid measures. SDS for this product is available under the Documents tab.

Documentation